Page 25 - Pipelife Irish Trade Brochure
P. 25
INSTALLATION INSTRUCTIONS
1. Cut
– Cut the pipe squarely to desired length using
an appropriate cutting tool
2. Calibrate
– Insert the reamer into the cut pipe and rotate,
pushing slightly to remove all burrs and rough
edges. NOTE, a poorly calibrated pipe could
damage the O rings on insertion.
3. Connect and Press
– Connect the pipe and fitting and check pipe
is fully inserted in the inspection windows. The
white of the pipe must be viewable through
these holes.
DO NOT USE SEALING AGENTS SUCH AS PTFE
TAPE OR JOINTING COMPOUND. Use TH Profile
Jaws to press.
QUAL-PEX ML PRO 25
